Miele
All Miele Washing Machine Error Codes
Every known Miele washing machine error code with plain-English explanations, difficulty ratings, and step-by-step DIY fix guides.
16 error codes
F01
The NTC temperature sensor has a short circuit or is reading an abnormally low resistance.
Moderate Repair
20–40 minutes
F02
The NTC temperature sensor has an open circuit or its wiring is broken.
Moderate Repair
20–40 minutes
F10
The washing machine is not receiving sufficient water within the expected time.
Moderate Repair
15–40 minutes
F11
The washing machine cannot drain water from the drum within the expected time.
Moderate Repair
15–40 minutes
F16
The machine has detected excessive foam (suds) in the drum.
Easy Fix
10–30 minutes
F19
The flow meter in the water inlet system is not providing valid signals.
Moderate Repair
20–45 minutes
F20
The water is not reaching the target temperature within the expected time.
Advanced Repair
30–60 minutes
F34
The door lock mechanism is not engaging or releasing properly.
Moderate Repair
20–45 minutes
F35
The door lock cannot be released at the end of the cycle.
Moderate Repair
15–45 minutes
F43
The electronic control board has a memory (EEPROM) read/write error.
Advanced Repair
10–20 minutes (diagnosis)
F50
The drum motor is not achieving or maintaining the correct speed.
Advanced Repair
30–75 minutes
F56
The drum motor is spinning faster than the target speed.
Critical / Safety
30–60 minutes
F138
Water has been detected in the base pan, triggering the flood protection system.
Critical / Safety
30–90 minutes
F53
The motor inverter (frequency converter) has detected an internal error.
Critical / Safety
Professional service required
F04
The water in the washer is not reaching the target temperature within the allowed time.
Moderate Fix
30–60 minutes
F24
The water level pressure switch is not responding or is sending inconsistent signals.
Moderate Fix
20–40 minutes