GE
All GE Dishwasher Error Codes
Every known GE dishwasher error code with plain-English explanations, difficulty ratings, and step-by-step DIY fix guides.
14 error codes
C1
The dishwasher's drain pump has been running for more than 2 minutes without successfully draining the tub.
Easy Fix
15–30 minutes
C2
The total pump-out cycle has exceeded 7 minutes, indicating a severe drainage problem.
Moderate Repair
20–45 minutes
C3
The wash pump is not building sufficient water pressure.
Moderate Fix
15–30 minutes
C4
The dishwasher has filled with water twice following a power outage, indicating the float switch may be stuck.
Easy Fix
10–20 minutes
C5
The dishwasher is not filling with enough water.
Easy Fix
10–20 minutes
C6
The water entering the dishwasher is below the minimum temperature required for effective cleaning.
Easy Fix
10–20 minutes
C7
The water clarity sensor is malfunctioning.
Advanced Fix
30–60 minutes
C8
The detergent dispenser door is blocked and cannot open during the wash cycle.
Easy Fix
5–15 minutes
C9
The dishwasher did not fill with enough water within the allowed time.
Easy Fix
15–30 minutes
FTD
The dishwasher has detected standing water remaining in the tub after the drain cycle should have completed.
Moderate Repair
20–45 minutes
LED 1
The dishwasher's main control board has a stuck relay, preventing the cycle from advancing.
Advanced Repair
30–60 minutes
PF
The dishwasher lost power during a cycle.
Easy Fix
1–2 minutes
H2O
The dishwasher is detecting a low water supply situation.
Easy Fix
10–20 minutes
PrS
The pressure sensor is sending an invalid signal and the cycle cannot start.
Professional
30–60 minutes