Electrolux
All Electrolux Washing Machine Error Codes
Every known Electrolux washing machine error code with plain-English explanations, difficulty ratings, and step-by-step DIY fix guides.
16 error codes
E11
The washer is taking too long to fill with water during the wash cycle.
Moderate
15–40 minutes
E13
The washer has detected a water leak in the base pan or tub area.
Serious
30–90 minutes
E21
The washer is unable to drain the water within the allowed time.
Moderate
15–45 minutes
E35
The water level in the tub has exceeded the maximum safe level.
Serious
25–50 minutes
E41
The washer door lock cannot engage or is not being detected by the control board.
Moderate
20–50 minutes
E42
The washer door lock is stuck in the locked position and will not release.
Moderate
15–40 minutes
E52
The control board has lost the speed signal from the motor's tachometer.
Serious
30–60 minutes
E55
The motor has drawn excessive current or a short circuit has been detected in the motor circuit.
Critical
45–90 minutes
E44
The control board cannot detect the position of the door lock mechanism.
Moderate
25–50 minutes
E91
The main control board and the user interface board are not communicating properly.
Serious
30–60 minutes
E10
The washer has not detected any water entering the drum after the fill valve was activated.
Moderate
10–30 minutes
E54
The motor relay on the control board is detected as stuck in the on or off position.
Serious
30–60 minutes
E31
The water level pressure sensor is sending a signal outside the expected frequency range.
Moderate Fix
20–40 minutes
E38
The water level pressure reading does not change during the spin cycle as expected.
Moderate Fix
20–45 minutes
E58
The drive motor is drawing excessive current.
Advanced Fix
30–60 minutes
E94
The washer's stored cycle configuration data has become corrupted.
Advanced Fix
20–45 minutes