Electrolux Washer Error Code E44 — Door Lock Detection Failure
What this means
The E44 error code on Electrolux washers indicates the control board cannot determine whether the door is locked or unlocked. Unlike E41 (won't lock) or E42 (won't unlock), E44 points to a detection circuit failure — the lock may be physically working but the feedback signal is not reaching the board. Common causes include a broken wire in the lock circuit, a faulty door lock switch, or a control board input failure.
Alternate codes: E 44
Step-by-step fix
4 stepsPower cycle the washer
Unplug the washer for 5 minutes, then plug it back in. Try starting a cycle. Intermittent wiring issues can sometimes be resolved with a reset.
If the code appears only occasionally, suspect a loose wire connection.
Inspect the door lock wiring harness
Remove the top panel and trace the wiring from the door lock assembly to the main control board. Look for any broken wires, loose connectors, or areas where the harness may be rubbing against the cabinet and wearing through insulation.
The wiring harness often gets flexed near the door hinge area — check there first.
Test the door lock switch contacts
Disconnect the door lock assembly and test the switch contacts with a multimeter. When manually actuated, the lock switch should show continuity in the locked position and no continuity when unlocked.
Refer to the wiring diagram on the inside of the washer's top panel or rear panel for the correct pins to test.
Replace the door lock or repair wiring
If the lock switch fails the test, replace the door lock assembly. If a broken wire is found, repair it with a proper splice and heat-shrink tubing.
Avoid electrical tape for wire repairs inside appliances — it degrades over time. Use crimp connectors or solder with heat-shrink.
When to call a professional
If the lock and wiring are fine, the control board input circuit may be damaged. A technician can test the board's door lock sense circuit.
Related error codes
Information compiled from manufacturer service manuals, official troubleshooting documentation, and appliance repair industry resources. This guide is for informational purposes only — always consult a qualified technician for complex repairs.
Learn more about our sourcesParts you may need
Links may earn us a commission at no extra cost to you. We only recommend parts relevant to this repair.