All Maytag Dryer Error Codes

AF

The exhaust vent is restricting airflow.

Moderate Fix 20–45 minutes

E1

The exhaust temperature thermistor circuit is open, preventing temperature monitoring.

Moderate Repair 20–40 minutes

F01

The main electronic control board has a communication failure.

Advanced Repair 30–60 minutes

F2 E1

A button on the dryer's control panel keypad is stuck or shorted.

Moderate Repair 15–40 minutes

L2

The electric dryer is only receiving half the required voltage.

Moderate Fix 5–15 minutes

PF

The dryer lost power during a cycle.

Easy Fix 1–5 minutes

F02

The control board is detecting a short circuit in the keypad.

Moderate Repair 20–40 minutes

F22

The exhaust temperature thermistor is reading outside the expected range.

Moderate Repair 20–35 minutes

F23

The exhaust high-limit thermostat has tripped due to excessive heat.

Serious — Potential Fire Hazard 30–60 minutes

F28

The moisture sensor bars inside the drum are not providing a valid reading.

Moderate Repair 15–30 minutes

F03

The exhaust temperature sensor is reading out of range, indicating a faulty thermistor or wiring issue.

Moderate 30-45 minutes

F26

The dryer's drive motor has failed or is not responding to the control board.

Advanced DIY 60-120 minutes

F30

The dryer has detected restricted exhaust airflow, typically from a clogged lint screen or vent.

Easy Fix 15-45 minutes

F31

The dryer is detecting low or missing voltage on the L2 power line, preventing the heater from operating.

Moderate 15-30 minutes

F25

The inlet temperature sensor (thermistor) has failed or is reading outside the acceptable range.

Moderate 30-45 minutes

F29

The moisture sensor bars inside the drum are not detecting moisture levels correctly.

Moderate 20-40 minutes