GE
All GE Dryer Error Codes
Every known GE dryer error code with plain-English explanations, difficulty ratings, and step-by-step DIY fix guides.
12 error codes
E1
The temperature sensor is giving incorrect readings.
Advanced Fix
25–45 minutes
E11
The dryer drum motor is not operating correctly or has stopped working entirely.
Advanced Repair
45–90 minutes
E13
The gas dryer's ignition system is not functioning properly due to a failed gas valve solenoid coil.
Moderate Repair
30–60 minutes
E14
One of the control panel buttons is stuck or continuously sending a signal to the control board.
Easy Fix
10–25 minutes
E2
A button on the control panel is stuck or shorted.
Moderate Fix
10–20 minutes
E3
The dryer's inlet thermistor has a short circuit, preventing accurate temperature readings.
Moderate Repair
20–40 minutes
E4
The dryer's inlet thermistor has an open circuit, meaning the sensor wire is broken or disconnected.
Moderate Repair
20–40 minutes
E5
The dryer's outlet thermistor has a short circuit, giving the control board false temperature data.
Moderate Repair
25–45 minutes
E6
The dryer's outlet thermistor has an open circuit, meaning no signal is reaching the control board.
Moderate Repair
25–45 minutes
E7
The dryer is not receiving the correct voltage from the wall outlet or electrical supply.
Easy Fix
10–30 minutes
E8
The exhaust vent is significantly restricted.
Moderate Fix
20–45 minutes
E9
The dryer has detected restricted airflow, typically due to a clogged lint filter, exhaust vent, or ductwork.
Easy Fix
15–45 minutes