GE Washer Error Code E22 — Door Not Closed or Drain Pump Relay Failure
What this means
The E22 error code on GE washers can indicate two different issues depending on the model. On some models, it means the door is not closed or latched properly, preventing the cycle from starting. On other models, it points to a failed drain pump relay on the main control board. Check the door latch first, and if the door closes correctly, the control board may need replacement.
Step-by-step fix
3 stepsCheck the door latch
Open and close the washer door firmly. Listen for the latch to click. If the door doesn't latch securely, check for clothing or debris caught in the door seal.
On front-load models, the door boot seal can shift and prevent the door from closing fully.
Test the door switch
Unplug the washer. Test the door switch with a multimeter for continuity when the door is closed. If there's no continuity, the switch is faulty.
Check the drain pump relay
If the door latches correctly, the drain pump relay on the main control board may have failed. Listen for the drain pump — if it doesn't activate during drain, the relay may be burned out.
This requires control board replacement; individual relay repair is not practical.
When to call a professional
If the control board's drain pump relay has failed, have a technician replace the main control board.
Related error codes
Information compiled from manufacturer service manuals, official troubleshooting documentation, and appliance repair industry resources. This guide is for informational purposes only — always consult a qualified technician for complex repairs.
Learn more about our sourcesParts you may need
Links may earn us a commission at no extra cost to you. We only recommend parts relevant to this repair.