Whirlpool Washer Error Code F8 E1 — Water Supply Error
What this means
The F8 E1 (or LO FL) error means the washer is not receiving enough water. This is the most common Whirlpool washer error and is usually caused by closed valves, kinked hoses, or clogged inlet screens.
Alternate codes: LO FL
Step-by-step fix
3 stepsCheck the water supply valves
Make sure both hot and cold water valves behind the washer are fully open.
Both valves must be open even if you only use cold water cycles.
Inspect and straighten hoses
Check both inlet hoses for kinks. Straighten any bends and ensure hoses aren't pinched behind the washer.
Leave 4 inches between the washer and wall to prevent hose kinking.
Clean inlet screens
Turn off water, disconnect hoses from the washer, and clean the small mesh filter screens inside the valve inlets.
These screens catch sediment — clean them every 6 months.
When to call a professional
If water supply is fine but the washer still won't fill, the inlet valve may be electrically faulty.
Related error codes
Information compiled from manufacturer service manuals, official troubleshooting documentation, and appliance repair industry resources. This guide is for informational purposes only — always consult a qualified technician for complex repairs.
Learn more about our sourcesParts you may need
Links may earn us a commission at no extra cost to you. We only recommend parts relevant to this repair.