Whirlpool Washer Error Code F0 E2 — Overflow Error
What this means
The F0 E2 error means the water level in the washer has exceeded the safe limit. This is usually caused by a stuck-open water inlet valve. The washer will attempt to drain to prevent flooding.
Step-by-step fix
3 stepsTurn off water supply
Immediately turn off both hot and cold water supply valves behind the washer.
If water is still entering the washer with valves closed, the supply hoses may be leaking at the connections.
Run a drain cycle
Try to run a drain/spin cycle to remove excess water. If the washer won't respond, manually drain through the drain pump filter.
Place towels around the base to catch any overflow.
Test the inlet valve
With the washer powered off, turn the water supply back on briefly. If water enters the washer when it's off, the inlet valve is stuck open and needs replacement.
A stuck-open inlet valve is the most common cause of overflow.
When to call a professional
Inlet valve replacement requires disconnecting water supply lines and electrical connections inside the machine.
Related error codes
Information compiled from manufacturer service manuals, official troubleshooting documentation, and appliance repair industry resources. This guide is for informational purposes only — always consult a qualified technician for complex repairs.
Learn more about our sourcesParts you may need
Links may earn us a commission at no extra cost to you. We only recommend parts relevant to this repair.