Whirlpool Oven Error Code F3 E2 — Oven Temperature Too High
What this means
The F3 E2 error code on Whirlpool ovens and ranges indicates the oven temperature has exceeded the maximum safe threshold during operation. The temperature sensor (RTD) is reading an abnormally high temperature, which could mean the bake or broil element relay is stuck closed (keeping the element on continuously), the temperature sensor is reading incorrectly, or the oven has a ventilation problem.
Alternate codes: F3E2
Step-by-step fix
4 stepsTurn off the oven immediately
Turn off the oven using the Cancel button. If the oven remains hot or the element stays visibly glowing after cancellation, turn off the circuit breaker immediately.
An element that stays on after Cancel is pressed indicates a stuck relay — this is a fire hazard.
Allow the oven to cool completely
With the breaker off, open the oven door and allow it to cool to room temperature before any inspection.
Do not attempt repairs on a hot oven.
Test the temperature sensor
With the oven at room temperature and breaker off, test the RTD sensor. It should read approximately 1,080–1,100 ohms. A very low reading may cause false high-temperature readings.
If the sensor reads correctly but the oven truly overheated, the control board relay is likely stuck.
Replace the control board
If the sensor is good and the oven truly overheated, the bake or broil relay on the control board is welded closed. Replace the control board.
A stuck relay is a safety hazard — do not use the oven until it's repaired.
When to call a professional
Overheating ovens are a safety concern. Professional repair is strongly recommended for this error code.
Related error codes
Information compiled from manufacturer service manuals, official troubleshooting documentation, and appliance repair industry resources. This guide is for informational purposes only — always consult a qualified technician for complex repairs.
Learn more about our sourcesParts you may need
Links may earn us a commission at no extra cost to you. We only recommend parts relevant to this repair.