Whirlpool Oven Error Code F2 E0 — Shorted Keypad (Touch Pad)
What this means
The F2 E0 error code on Whirlpool ovens and ranges indicates a shorted touch pad (keypad). The control board is receiving a continuous or abnormal signal from the touchpad membrane, as if a button is permanently pressed. This is commonly caused by moisture behind the control panel, a worn membrane switch, or a loose connection between the touchpad and the control board.
Alternate codes: F2E0
Step-by-step fix
3 stepsTry to clear the error
Press the Cancel button and wait 60 seconds. If the error clears, monitor for recurrence. If it clears and stays clear, moisture may have been the temporary cause.
Cooking steam that rises to the control panel area is a common cause of temporary touchpad errors.
Check the touchpad connection
Turn off the breaker. Remove the rear panel to access the control board. Check the ribbon cable connecting the touchpad to the control board. Disconnect and reseat it firmly.
If the ribbon cable connector is oxidized, clean the contacts gently with a pencil eraser.
Replace the touchpad or control board
If the ribbon cable is good and the error persists, replace the touchpad. On some models, the touchpad and control board are a single assembly — in that case, replace the entire unit.
Check if your model has the touchpad as a separate part before ordering.
When to call a professional
If you've replaced the touchpad and the error persists, the control board's input circuit may be damaged, requiring professional diagnosis.
Related error codes
Information compiled from manufacturer service manuals, official troubleshooting documentation, and appliance repair industry resources. This guide is for informational purposes only — always consult a qualified technician for complex repairs.
Learn more about our sourcesParts you may need
Links may earn us a commission at no extra cost to you. We only recommend parts relevant to this repair.