E-82

Samsung Microwave Error Code E-82 — Communication Error

Advanced Fix 30–60 minutes Tools: Phillips screwdriver, Multimeter

What this means

The E-82 error code on Samsung microwaves indicates a communication failure between internal control modules — typically the main control board and the display/interface board or the inverter board. This can be caused by a loose wiring harness, a power surge damaging one of the boards, or a component failure on a board. The microwave will typically not operate until the communication link is restored.

Alternate codes: E82

Step-by-step fix

4 steps
1

Power cycle the microwave

Unplug the microwave for five minutes. Plug it back in and test. Power surges can cause temporary communication glitches between boards.

If you recently experienced a power outage or surge, a reset often clears this code.

2

Reseat internal harness connections

Unplug the microwave. Remove the outer cabinet. Locate the wiring harnesses connecting the main control board, display board, and inverter board. Unplug and firmly reseat each connector. Check for bent pins, corrosion, or heat damage.

WARNING: Stay away from the high-voltage capacitor and magnetron connections. Only handle low-voltage control harnesses.

3

Inspect the control boards visually

Look at each circuit board for burn marks, swollen capacitors, or cracked solder joints — especially near connector pins and voltage regulator components.

A board with visible damage needs replacement. Do not attempt to repair burned or cracked components on the board.

4

Replace the faulty board

If harness connections are good, the most likely culprit is the main control board or the display board. Replace the board that shows visible damage first. If no visible damage is apparent, the main control board is the more common failure.

Compare the cost of control board replacement to a new microwave — microwaves with multiple board failures may not be worth repairing.

When to call a professional

Due to the high-voltage components inside microwaves, board-level troubleshooting is best handled by a qualified technician unless you have specific experience with microwave repair.

Information compiled from manufacturer service manuals, official troubleshooting documentation, and appliance repair industry resources. This guide is for informational purposes only — always consult a qualified technician for complex repairs.

Learn more about our sources

Parts you may need

Main Control Board

Part #DE92-03624B · $80–$160

Most common cause of communication errors

Find Part

Display Control Board

Part #DE92-03045B · $50–$120

If display board shows visible damage

Find Part

Links may earn us a commission at no extra cost to you. We only recommend parts relevant to this repair.

Quick Info

BrandSamsung
ApplianceMicrowave
Error CodeE-82
DifficultyAdvanced Fix
Est. Time30–60 minutes