Maytag Washer Error Code F8 E2 — Dispenser System Error
What this means
The F8 E2 error code indicates the automatic dispenser system is malfunctioning. The dispenser motor is unable to rotate to the correct position, usually due to a clogged dispenser tray, dried detergent buildup, or a failed dispenser motor. This prevents proper dispensing of detergent, bleach, or fabric softener during the wash cycle.
Alternate codes: F8E2
Step-by-step fix
4 stepsRemove and clean the dispenser tray
Pull out the dispenser drawer by pressing the release tab. Rinse all compartments under warm running water and scrub away dried detergent with a soft brush.
Soak the tray in warm water for 10 minutes to dissolve stubborn residue.
Clean the dispenser housing
With the tray removed, wipe inside the dispenser housing. Clear any buildup from the detergent, bleach, and softener channels.
Use a small bottle brush to reach into narrow channels.
Reinstall and test
Slide the clean dispenser tray back in and run a short wash cycle to check if the error clears.
Use HE (High Efficiency) detergent and do not overfill the dispenser.
Check the dispenser motor
If cleaning does not resolve the issue, the dispenser motor may be faulty. Access the motor behind the dispenser housing and test for operation.
Listen for the motor actuating when a cycle starts — no sound indicates a dead motor.
When to call a professional
If cleaning the dispenser does not clear the error and the motor appears to have failed, a technician can replace the dispenser assembly.
Related error codes
Information compiled from manufacturer service manuals, official troubleshooting documentation, and appliance repair industry resources. This guide is for informational purposes only — always consult a qualified technician for complex repairs.
Learn more about our sourcesParts you may need
Links may earn us a commission at no extra cost to you. We only recommend parts relevant to this repair.