Maytag Washer Error Code F8 E1 — Water Supply Error
What this means
The F8 E1 error means the Maytag washer can't fill with water. Since Maytag uses the Whirlpool platform, the causes and fixes are identical — check supply valves, hoses, and inlet screens.
Alternate codes: LO FL
Step-by-step fix
3 stepsCheck water supply valves
Make sure both hot and cold valves behind the washer are fully open.
Both must be on even for cold-only wash cycles.
Inspect inlet hoses
Check for kinks and ensure connections are tight at both ends.
Leave 4 inches between washer and wall.
Clean inlet filter screens
Turn off water, disconnect hoses, and rinse the small mesh filters in the inlet ports.
Hard water areas need more frequent cleaning.
When to call a professional
If supply is fine but washer won't fill, the inlet valve may need replacement.
Related error codes
Information compiled from manufacturer service manuals, official troubleshooting documentation, and appliance repair industry resources. This guide is for informational purposes only — always consult a qualified technician for complex repairs.
Learn more about our sourcesParts you may need
Links may earn us a commission at no extra cost to you. We only recommend parts relevant to this repair.