Maytag Washer Error Code F5 E2 — Door Lock Failure
What this means
The F5 E2 error code on Maytag washers indicates the door lock mechanism cannot engage or latch correctly. This prevents the washer from starting a cycle since the door must be securely locked for safety. Common causes include a worn or broken door lock assembly, debris in the door latch area, or a wiring issue between the lock and the control board.
Step-by-step fix
4 stepsInspect the door latch area
Open the washer door and check the latch striker on the door and the lock mechanism on the frame. Remove any lint, debris, or detergent buildup that might prevent full engagement.
A buildup of fabric softener residue is a surprisingly common cause of latch failure.
Try a hard reset
Unplug the washer for 1 minute, then plug it back in and try to start a cycle. This clears any temporary glitch in the control board.
Make sure to press the door firmly closed before restarting.
Test the door lock assembly
Disconnect power. Remove the front panel or access the door lock from behind the front seal. Disconnect the wire harness and use a multimeter to test continuity across the lock switch terminals.
Refer to your model's tech sheet (inside the control panel or behind the lower panel) for the correct terminal pin values.
Replace the door lock if faulty
If the lock fails continuity testing, remove the mounting screws and unclip the lock from the front panel. Install the new lock, reconnect the wire harness, and test with a short cycle.
Take a photo of the wire connections before disconnecting to ensure correct reassembly.
When to call a professional
If the door lock tests fine but the error persists, the issue may be the main control board or the wiring harness — both require advanced diagnostics.
Related error codes
Information compiled from manufacturer service manuals, official troubleshooting documentation, and appliance repair industry resources. This guide is for informational purposes only — always consult a qualified technician for complex repairs.
Learn more about our sourcesParts you may need
Links may earn us a commission at no extra cost to you. We only recommend parts relevant to this repair.