Maytag Dishwasher Error Code F6 E1 — Control System Failure
What this means
The F6 E1 error code indicates an internal failure in the dishwasher's electronic control system. The control board is unable to start or resume wash cycles. If a cycle was running when the error occurred, it may finish, but no new cycles can be started until the issue is resolved.
Alternate codes: F6E1
Step-by-step fix
4 stepsPower cycle the dishwasher
Turn off the circuit breaker for 5 minutes, then turn it back on. Try starting a new wash cycle.
Wait the full 5 minutes for the control board memory to fully clear.
Check for loose connections
Remove the inner door panel and inspect all wire connections to the main control board. Reseat any loose plugs.
Vibration during wash cycles can loosen connectors over time.
Inspect the control board
Look at the main control board for burn marks, damaged components, or signs of moisture intrusion.
Steam leaking past the door seal is a common cause of control board failure.
Replace the main control board
If the error persists after power cycling and checking connections, the main control board needs replacement.
Transfer all wire connections one at a time to ensure correct installation.
When to call a professional
Control board replacement involves working with the dishwasher's electronic systems. If you are not comfortable with this, a professional technician can handle the repair.
Related error codes
The display panel is not communicating with the main control board.
Advanced DIY · 30-60 minutes
Foam or suds have been detected inside the dishwasher, preventing normal operation.
Easy Fix · 30-60 minutes
The incoming water temperature is not hot enough for optimal dishwasher cleaning performance.
Easy Fix · 5-15 minutes
Information compiled from manufacturer service manuals, official troubleshooting documentation, and appliance repair industry resources. This guide is for informational purposes only — always consult a qualified technician for complex repairs.
Learn more about our sourcesParts you may need
Links may earn us a commission at no extra cost to you. We only recommend parts relevant to this repair.