LG Washer Error Code DR — Drain Issue (Top Load)
What this means
The DR error code on LG top-load washers indicates a drainage problem similar to the OE code on front-load models. The washer cannot pump out water within the expected time. Common causes include a clogged drain filter, kinked drain hose, or a faulty drain pump.
Step-by-step fix
3 stepsCheck the drain hose
Ensure the drain hose is not kinked, crushed, or positioned higher than 8 feet from the floor. Straighten any bends and verify proper drain hose installation.
Clean the drain pump filter
Locate the drain pump filter (usually at the front bottom of the washer behind a small access panel). Place towels and a shallow container below it. Open the filter slowly to catch water, then clean out any lint, coins, or debris.
Common items found in the filter include coins, hairpins, buttons, and small fabric pieces.
Test the drain pump
Listen for the drain pump running during the drain portion of the cycle. If the pump is silent, it may have failed. If it hums but does not pump, an obstruction inside the pump may be the cause.
When to call a professional
If the drain pump motor has failed, a technician will need to replace it.
Related error codes
Information compiled from manufacturer service manuals, official troubleshooting documentation, and appliance repair industry resources. This guide is for informational purposes only — always consult a qualified technician for complex repairs.
Learn more about our sourcesParts you may need
Links may earn us a commission at no extra cost to you. We only recommend parts relevant to this repair.