LG Washer Error Code dE2 — Door Open During Cycle
What this means
The dE2 error code indicates the washer door was opened or became unlocked during an active cycle. This can happen if the door lock fails mid-cycle, if someone manually forces the door open, or if there is a wiring issue between the door lock and control board. The washer stops immediately as a safety measure.
Step-by-step fix
3 stepsPower cycle the washer
Unplug the washer from the wall for 5 minutes, then plug it back in. Start a new cycle to see if the door lock holds. A single occurrence can be a temporary glitch.
Inspect the door lock
Run a cycle and listen for the door lock to engage. Try gently pulling the door — it should be firmly locked. If the door opens easily during a cycle, the lock solenoid is failing.
Never force the door open during a cycle — there may be hot water under pressure inside.
Check wiring connections
Unplug the washer. Remove the top panel to access the door lock wiring harness. Check that all connections are secure and that no wires are burned, frayed, or disconnected.
Vibration from normal use can gradually loosen wire harness connections over time.
When to call a professional
If the door lock assembly or its wiring harness needs replacement, call a technician unless you are comfortable with electrical repairs on appliances.
Related error codes
Information compiled from manufacturer service manuals, official troubleshooting documentation, and appliance repair industry resources. This guide is for informational purposes only — always consult a qualified technician for complex repairs.
Learn more about our sourcesParts you may need
Door Lock Switch Assembly
Part #EBF49827803 · $30–$55
If door lock does not hold during cycles
Links may earn us a commission at no extra cost to you. We only recommend parts relevant to this repair.