KitchenAid Washer Error Code F8E1 — Low Water Flow / No Fill
What this means
The F8E1 error code on KitchenAid washers (may also display 'LO FL') indicates the washer is not detecting water entering the drum, or the flow is too slow. The water supply valves may be closed, supply hoses may be kinked, inlet valve screens may be clogged, or the water inlet valve itself has failed.
Alternate codes: LO FL
Step-by-step fix
4 stepsCheck the water supply
Make sure both hot and cold water faucets behind the washer are fully open.
Both valves must be open, even if you're running a cold-only cycle.
Inspect the supply hoses
Check both water supply hoses for kinks or bends. Straighten any kinks found.
Clean the inlet screens
Turn off the water supply. Disconnect the hoses from the back of the washer. Check the filter screens inside the inlet valve connections for sediment or debris. Clean or replace the screens.
Hard water areas are prone to mineral buildup in these screens.
Test the water inlet valve
If the screens are clean and water supply is good, the inlet valve may have failed. Test it with a multimeter for proper resistance. Replace if faulty.
When to call a professional
If the water supply, hoses, screens, and valve all check out, the flow meter or control board may need diagnosis by a technician.
Related error codes
Information compiled from manufacturer service manuals, official troubleshooting documentation, and appliance repair industry resources. This guide is for informational purposes only — always consult a qualified technician for complex repairs.
Learn more about our sourcesParts you may need
Links may earn us a commission at no extra cost to you. We only recommend parts relevant to this repair.