GE Washer Error Code EF2 — Too Much Detergent (Excessive Suds)
What this means
The EF2 error code on GE washers indicates the control board has detected excessive suds in the wash drum. Too many suds interfere with the wash and drain cycles and can cause leaks. This is almost always caused by using too much detergent or using non-HE detergent in an HE washer. The washer will add extra rinse cycles to try to clear the suds.
Step-by-step fix
3 stepsLet the washer finish
The washer will typically add extra rinse cycles to clear the suds. Let it complete the cycle on its own.
Reduce detergent next time
Use only HE (High Efficiency) detergent in HE washers and use the recommended amount — usually only 1–2 tablespoons per load.
More detergent does not mean cleaner clothes. Excess suds actually trap dirt and reduce cleaning performance.
Run an extra rinse cycle if needed
If suds remain visible after the cycle completes, run an additional rinse and spin cycle without adding any detergent.
When to call a professional
This code is almost always user error and doesn't require a repair. If it occurs with proper detergent amounts, the pressure sensor may be overly sensitive — consult a technician.
Related error codes
Information compiled from manufacturer service manuals, official troubleshooting documentation, and appliance repair industry resources. This guide is for informational purposes only — always consult a qualified technician for complex repairs.
Learn more about our sourcesParts you may need
No replacement parts typically needed for this fix.
Links may earn us a commission at no extra cost to you. We only recommend parts relevant to this repair.