Frigidaire Washer Error Code E20 — Drain Error
What this means
The E20 error on Frigidaire washers means the drain system is not functioning — water remains in the tub after a cycle. This is usually caused by a clogged drain filter, kinked drain hose, or obstructed drain pump.
Alternate codes: E21
Step-by-step fix
3 stepsClean the drain pump filter
Open the access panel at the lower front. Place towels and a pan below. Open the filter slowly, drain water, and clean debris from the filter.
The filter access varies by model — check behind the bottom front panel.
Check the drain hose
Inspect for kinks and verify proper height at the drain connection.
The hose should have a high loop or be at least 24 inches above the floor.
Run a drain cycle
After cleaning, run a drain/spin cycle to verify the issue is resolved.
If the pump hums but doesn't drain, an object is likely jamming the impeller.
When to call a professional
If the pump motor has failed, it needs replacement.
Related error codes
Information compiled from manufacturer service manuals, official troubleshooting documentation, and appliance repair industry resources. This guide is for informational purposes only — always consult a qualified technician for complex repairs.
Learn more about our sourcesParts you may need
Links may earn us a commission at no extra cost to you. We only recommend parts relevant to this repair.