Frigidaire Washer Error Code E10 — Water Supply Error
What this means
The E10 error indicates the Frigidaire washer can't fill with enough water. Check the supply valves, inlet hoses, and filter screens.
Alternate codes: E11
Step-by-step fix
3 stepsCheck water supply valves
Ensure both valves behind the washer are fully open.
Both hot and cold must be on.
Inspect inlet hoses
Check for kinks and ensure tight connections.
Replace rubber hoses every 5 years as preventive maintenance.
Clean inlet filter screens
Turn off water, disconnect hoses, and clean the mesh filters in the inlet valve ports.
Sediment is the most common cause — especially in older homes.
When to call a professional
If supply is fine but the washer won't fill, the inlet valve may need replacement.
Related error codes
Information compiled from manufacturer service manuals, official troubleshooting documentation, and appliance repair industry resources. This guide is for informational purposes only — always consult a qualified technician for complex repairs.
Learn more about our sourcesParts you may need
Links may earn us a commission at no extra cost to you. We only recommend parts relevant to this repair.