Frigidaire Oven Error Code F13 — EEPROM Checksum Error
What this means
Error code F13 indicates the electronic oven control's EEPROM (electrically erasable programmable read-only memory) has failed a checksum verification. The stored configuration data is corrupted, preventing the oven from operating with the correct settings.
Step-by-step fix
3 stepsPower cycle the oven
Turn off the circuit breaker for 5 minutes, then restore power and press Cancel/Clear. Occasionally, EEPROM errors can self-correct after a full power reset.
This code sometimes appears after a power outage — the reset may be all that's needed.
Attempt a second reset
If the error returns, try turning the breaker off for 30 minutes for a more thorough capacitor discharge, then restore power.
A longer power-off period gives the EEPROM a better chance to reset properly.
Replace the electronic oven control
If the error persists, the EEPROM chip on the control board is permanently corrupted. The entire EOC board must be replaced.
Make sure to note your oven model number — the replacement EOC must have the correct configuration for your specific model.
When to call a professional
EEPROM failures require control board replacement, which is typically a professional repair.
Related error codes
Information compiled from manufacturer service manuals, official troubleshooting documentation, and appliance repair industry resources. This guide is for informational purposes only — always consult a qualified technician for complex repairs.
Learn more about our sourcesParts you may need
Electronic Oven Control (EOC)
Part #316560127 · $200–$400
If EEPROM is permanently corrupted
Links may earn us a commission at no extra cost to you. We only recommend parts relevant to this repair.