Whirlpool Washer Error Code F5 E1 — Door Switch Error
What this means
The F5 E1 error means the door switch is not communicating with the control board. The washer can't determine if the door is open or closed. This is different from F5 E2 (lock error) — this is specifically the position detection switch.
Step-by-step fix
3 stepsOpen and close the door firmly
Open the door completely and close it firmly until you hear a distinct click. Try starting a cycle.
Check that nothing is preventing the door from closing fully.
Power cycle the washer
Unplug for 60 seconds and plug back in. This resets the door switch detection circuit.
A software glitch can sometimes cause false door switch errors.
Inspect the door switch
The door switch is located in the door frame area. Check that the wiring connector is firmly seated and not damaged.
The switch is usually accessible by removing the top panel of the washer.
When to call a professional
If the switch itself is faulty, it's a straightforward replacement but requires removing the washer's top or front panel.
Related error codes
Information compiled from manufacturer service manuals, official troubleshooting documentation, and appliance repair industry resources. This guide is for informational purposes only — always consult a qualified technician for complex repairs.
Learn more about our sourcesParts you may need
Links may earn us a commission at no extra cost to you. We only recommend parts relevant to this repair.