Whirlpool Washer Error Code F1 E1 — Control Board Error
What this means
The F1 E1 error indicates a failure in the main electronic control board. This could be caused by a power surge, moisture damage, or component failure on the board itself.
Step-by-step fix
2 stepsPower cycle the washer
Unplug the washer for 5 minutes, then plug it back in. This can clear a temporary board glitch caused by a power surge.
If your area recently had a storm or power outage, this error is likely surge-related.
Check for moisture
If the washer is in a damp environment, moisture can affect the control board. Check for condensation or water damage on the board (accessible from the top or rear panel).
A dehumidifier in the laundry room can prevent moisture-related board issues.
When to call a professional
Control board replacement requires proper diagnosis to confirm the board is the issue and not a connected component. This is a professional repair.
Related error codes
Information compiled from manufacturer service manuals, official troubleshooting documentation, and appliance repair industry resources. This guide is for informational purposes only — always consult a qualified technician for complex repairs.
Learn more about our sourcesParts you may need
Main Control Board
Part #W10803586 · $100–$250
If board has failed (technician diagnosis required)
Links may earn us a commission at no extra cost to you. We only recommend parts relevant to this repair.