Whirlpool Oven Error Code F5 E0 — Door Switches Do Not Match
What this means
Error F5 E0 indicates the door switches are sending contradictory signals to the control board. Most ovens have two door switches for safety, and they must agree on whether the door is open or closed. A faulty switch, misaligned door, or wiring issue can cause this mismatch.
Alternate codes: F5E0
Step-by-step fix
4 stepsOpen and close the door firmly
Make sure the door is fully closed and the latch engages.
Test the door switches
Access the door switches behind the front panel. Test each with a multimeter for continuity in the closed position.
There are typically two switches — both must show continuity when the door is closed.
Check wiring
Inspect the wiring to both door switches for damage.
Replace faulty switch
Replace any switch that does not show proper continuity.
When to call a professional
If you cannot access or test the door switches.
Information compiled from manufacturer service manuals, official troubleshooting documentation, and appliance repair industry resources. This guide is for informational purposes only — always consult a qualified technician for complex repairs.
Learn more about our sourcesParts you may need
Links may earn us a commission at no extra cost to you. We only recommend parts relevant to this repair.