Whirlpool Oven Error Code F0 E0 — Analog-to-Digital Converter Failure
What this means
The F0 E0 error code on Whirlpool ovens and ranges indicates the control board's analog-to-digital (A/D) converter has failed. The A/D converter translates analog sensor signals (like temperature readings) into digital data the processor can use. When it fails, the oven cannot accurately read any of its sensors. This is typically caused by a power surge or component failure on the control board.
Alternate codes: F0E0, F0
Step-by-step fix
3 stepsPower cycle the oven
Turn off the circuit breaker for the oven for at least 5 minutes. Restore power and wait 1 minute to see if the error returns.
A momentary power surge can corrupt the A/D converter temporarily — a reset may resolve it.
Check for loose connections
Turn off the breaker. Remove the rear panel or front control panel to access the control board. Check all wire harness connections for looseness.
Focus on the connectors for the temperature sensor and keypad — these feed the A/D converter.
Replace the control board
If the error persists after power cycling and checking connections, the control board needs replacement. Disconnect all wire harnesses (photograph first), remove the mounting screws, and install the new board.
Ensure the replacement board is correct for your specific oven model.
When to call a professional
Control board replacement on ovens involves working near high-voltage components. If you're not comfortable, have a professional install it.
Related error codes
Information compiled from manufacturer service manuals, official troubleshooting documentation, and appliance repair industry resources. This guide is for informational purposes only — always consult a qualified technician for complex repairs.
Learn more about our sourcesParts you may need
Links may earn us a commission at no extra cost to you. We only recommend parts relevant to this repair.