Samsung Washer Error Code dS — Door Opened During Cycle
What this means
The dS error code means the door was opened (or detected as opened) while a wash cycle was in progress. The washer stops immediately as a safety precaution to prevent water spillage. This is different from the dE error, which means the door won't lock at all.
Step-by-step fix
2 stepsClose the door and restart
If the door was accidentally opened during a cycle (some top-loaders allow this), close it securely and press Start/Pause to resume the cycle.
Front-load washers lock the door during cycles — if the door opened on a front-loader, the lock mechanism may be failing.
Check the door switch/sensor
If the door is closed but the washer still shows dS, the door switch sensor may be faulty. Try opening and firmly closing the door again, listening for the click of the latch.
On front-loaders, check the rubber door seal — if it's bulging or displaced, it can prevent the door from closing fully.
When to call a professional
If the door is closed but the washer repeatedly shows dS, the door switch/sensor needs replacement. This is a relatively simple repair for a technician.
Related error codes
Information compiled from manufacturer service manuals, official troubleshooting documentation, and appliance repair industry resources. This guide is for informational purposes only — always consult a qualified technician for complex repairs.
Learn more about our sourcesParts you may need
Links may earn us a commission at no extra cost to you. We only recommend parts relevant to this repair.