Samsung Refrigerator Error Code 14E — Ice Maker Sensor / Function Error
What this means
The 14E error code indicates a problem with the ice maker sensor, often relating to the ice-full detection sensor or the ice maker's operating function. The refrigerator may stop making ice or fail to detect when the ice bin is full.
Step-by-step fix
3 stepsReset the ice maker
Locate the reset button on the ice maker (usually a small button on the side or bottom of the unit). Press and hold it for about 10 seconds until you hear a chime. This resets the ice maker's cycle.
The reset button location varies by model — check your owner's manual.
Check the ice bucket and detection arm
Remove the ice bucket and inspect the ice-level detection mechanism. Some models use a mechanical arm, others use an optical sensor. Clean any frost or ice buildup around the sensor area.
Ice clumping in the bucket can press against the sensor and falsely signal a full bin.
Check ice maker wiring
Inspect the wire harness from the ice maker to the main control board. Ensure connections are secure and no wires are damaged, especially where the harness runs through the freezer door hinge area.
Repeated door opening can stress wires running through the hinge area, causing intermittent breaks.
When to call a professional
If the reset and sensor cleaning don't resolve the issue, the ice maker assembly or control board may need replacement. A technician can diagnose the specific failure point.
Related error codes
Information compiled from manufacturer service manuals, official troubleshooting documentation, and appliance repair industry resources. This guide is for informational purposes only — always consult a qualified technician for complex repairs.
Learn more about our sourcesParts you may need
Ice Maker Assembly
Part #DA97-15217D · $80–$150
If ice maker is not functioning after reset
Links may earn us a commission at no extra cost to you. We only recommend parts relevant to this repair.