Samsung Dryer Error Code EEE — EEPROM Communication Error
What this means
The EEE error code indicates the EEPROM (electrically erasable programmable read-only memory) on the main control board has failed. The EEPROM stores the dryer's operating parameters and cycle settings. When it cannot be read or written, the dryer cannot operate. This is typically a control board failure that requires board replacement.
Alternate codes: E3
Step-by-step fix
3 stepsPower cycle the dryer
Unplug the dryer for 10 minutes, then plug it back in. In rare cases, a power surge can corrupt the EEPROM temporarily and a full reset may restore it.
If the error clears after reset, use a surge protector to prevent future occurrences.
Check the wire harness to the control board
Unplug the dryer, remove the top panel, and ensure all wire connectors to the main control board are firmly seated. A loose connection can disrupt EEPROM communication.
Pay attention to the main ribbon cable connector.
Replace the main control board
If the error persists, the main control board with the EEPROM chip needs replacement. Unplug all connectors from the old board, remove it from its mounting, install the new board, and reconnect all harnesses.
Take a photo of all wire connections before disconnecting to ensure correct reconnection.
When to call a professional
EEPROM failures almost always require control board replacement. If you are not comfortable with board replacement, contact a technician.
Information compiled from manufacturer service manuals, official troubleshooting documentation, and appliance repair industry resources. This guide is for informational purposes only — always consult a qualified technician for complex repairs.
Learn more about our sourcesParts you may need
Links may earn us a commission at no extra cost to you. We only recommend parts relevant to this repair.