Samsung Dishwasher Error Code bE2 — Stuck Button on Control Panel
What this means
The bE2 error code indicates one or more buttons on the control panel are stuck or sending a continuous signal to the control board. This can be caused by a physically stuck button, moisture behind the control panel, or a faulty touchpad membrane. The dishwasher will not operate normally until the stuck button condition is resolved.
Alternate codes: 6E2
Step-by-step fix
3 stepsPress all buttons on the panel
Press each button on the control panel firmly one at a time to try to free any stuck button. A button may be physically stuck in the pressed position.
Pay attention to any button that feels different or doesn't spring back.
Clean the control panel
Wipe the control panel with a slightly damp cloth to remove any residue or moisture around the buttons. Dry thoroughly.
Steam and moisture from dishwasher cycles can accumulate behind the panel and cause phantom button presses.
Power cycle the dishwasher
Turn off the circuit breaker for the dishwasher for 5 minutes. Turn it back on and check if the error has cleared.
If the error returns, the touchpad membrane or control board may need replacement.
When to call a professional
If the error persists after cleaning and resetting, the touchpad assembly or control board needs replacement. A technician should diagnose which component is faulty.
Information compiled from manufacturer service manuals, official troubleshooting documentation, and appliance repair industry resources. This guide is for informational purposes only — always consult a qualified technician for complex repairs.
Learn more about our sourcesParts you may need
Control Panel / Touchpad Assembly
Part #DD97-00505A · $50–$120
If a button remains stuck or touchpad membrane is faulty
Links may earn us a commission at no extra cost to you. We only recommend parts relevant to this repair.