Samsung Dishwasher Error Code bE — Button Stuck Error
What this means
The bE error code means the dishwasher has detected that a control panel button is stuck in the pressed position for longer than normal. This can be caused by moisture, residue, or a physically stuck button. In some cases, the user interface board may be faulty.
Alternate codes: bE2
Step-by-step fix
3 stepsPower cycle the dishwasher
Turn off the circuit breaker for 5 minutes. Turn it back on and check if the error clears.
Check for stuck buttons
Press each button on the control panel one at a time. Feel for any button that is sticky, doesn't spring back, or feels different from the others.
Steam from cooking near the dishwasher can cause moisture to get behind the panel.
Clean the control panel
Wipe the control panel area with a soft damp cloth. Pay special attention to the edges around each button. Do not spray liquid directly on the controls.
Avoid using harsh chemicals on the control panel.
When to call a professional
If cleaning doesn't resolve the stuck button, the user interface board behind the panel may need replacement. A technician can diagnose whether it's the membrane overlay or the board.
Information compiled from manufacturer service manuals, official troubleshooting documentation, and appliance repair industry resources. This guide is for informational purposes only — always consult a qualified technician for complex repairs.
Learn more about our sourcesParts you may need
User Interface Control Board
Part #DD92-00033C · $60–$120
If buttons remain stuck after cleaning
Links may earn us a commission at no extra cost to you. We only recommend parts relevant to this repair.