Miele Dryer Error Code F36 — Door Switch Fault
What this means
Error F36 on Miele dryers indicates the door switch does not confirm that the door is closed, or it is sending incorrect signals. The dryer will not start a cycle if the door is not confirmed closed. Causes include a faulty door latch, a worn or failed micro-switch, debris in the latch area, or a wiring issue.
Alternate codes: F 36
Step-by-step fix
4 stepsCheck the door closure
Close the door firmly and listen for a positive click. If the door does not latch, check for lint buildup on the latch or strike, a shifted door seal, or a foreign object in the door opening.
Lint accumulation on the door latch is extremely common on dryers and can prevent proper closure.
Clean the latch area
Use a damp cloth to wipe down the door latch hook, the strike plate on the body, and the area around them. Remove any lint or fabric softener residue.
A small brush (like a toothbrush) works well for cleaning inside the latch recess.
Test the door switch
Unplug the dryer. Access the door switch (usually behind the front panel near the latch). Disconnect it and test for continuity when pressed and when released.
Miele dryer door switches are usually very reliable. If one has failed, it has likely been exposed to excessive heat due to a vent restriction.
Replace the door switch or latch
If the switch has failed, replace it. If the latch mechanism is worn or broken, replace the latch. Both are typically secured with 1–2 small screws.
When reassembling, ensure the wires are routed away from any heat sources.
When to call a professional
If the switch and latch are fine but F36 persists, the control board's door sense circuit may have a fault.
Information compiled from manufacturer service manuals, official troubleshooting documentation, and appliance repair industry resources. This guide is for informational purposes only — always consult a qualified technician for complex repairs.
Learn more about our sourcesParts you may need
Links may earn us a commission at no extra cost to you. We only recommend parts relevant to this repair.