Miele Dishwasher Error Code F69 — Circulation Pump Blocked
What this means
Error F69 on Miele dishwashers signals that the circulation pump has detected a blockage that prevents the impeller from rotating. This is different from F52 (motor fault) — F69 specifically means the control board attempted to start the pump but detected a locked-rotor condition. Broken glass, bone fragments, fruit pits, or detached spray arm parts are common culprits.
Alternate codes: F 69
Step-by-step fix
4 stepsRemove the spray arms and filters
Open the door, remove both upper and lower spray arms, and lift out all filter components from the sump area to access the pump chamber.
Place the filters in the sink for cleaning while you work on the pump.
Clear the pump impeller
Look into the exposed pump area with a flashlight. Use tweezers or pliers to carefully remove any debris — glass shards, bones, toothpicks, seeds, or broken plastic. Try to turn the impeller with your finger to confirm it rotates freely.
Wear gloves — broken glass shards are a common pump blockage and can cut your fingers.
Check the sump cover and spray arms
Inspect the spray arm bearing holes and nozzles for trapped debris. A loose bearing cap or detached nozzle piece can travel into the pump. Also check that the sump cover plate sits flat and is not lifting or cracked.
Run water through each spray arm to confirm all nozzles spray freely.
Test the pump operation
Reassemble the filters and spray arms. Start a quick rinse cycle to verify the pump runs and water sprays from the arms. The F69 code should clear.
If the pump hums but still does not turn after clearing all visible debris, the impeller may be cracked or the pump shaft bearing may be seized.
When to call a professional
If the pump impeller is cracked or the pump shaft bearing has seized, the circulation pump assembly needs to be replaced professionally.
Related error codes
Information compiled from manufacturer service manuals, official troubleshooting documentation, and appliance repair industry resources. This guide is for informational purposes only — always consult a qualified technician for complex repairs.
Learn more about our sourcesParts you may need
Circulation Pump Motor
Part #7785440 · $150–$300
If impeller is damaged or bearings are seized
Links may earn us a commission at no extra cost to you. We only recommend parts relevant to this repair.