Maytag Washer Error Code F0 E5 — Unbalanced / Overloaded Load
What this means
The F0 E5 error on Maytag washers appears when the control board detects excessive vibration caused by an unbalanced or overloaded drum. The washer will attempt to redistribute the load by adding water and re-tumbling, but if it cannot achieve balance, it stops the spin cycle and displays this error.
Alternate codes: F0E5
Step-by-step fix
3 stepsRedistribute or reduce the load
Open the washer and rearrange items evenly around the drum. If the load is too large, remove some items. Separate any tangled or balled-up clothing.
Avoid washing a single heavy item alone — add towels to balance the weight.
Check that the washer is level
Place a level on top of the washer. If it is not level, adjust the leveling feet by turning them clockwise to lower or counterclockwise to raise. Lock the feet in place with the jam nuts.
All four feet should be firmly on the floor with no rocking.
Check the suspension system
If this error occurs frequently with normal loads, the shock absorbers (front-loaders) or suspension springs (top-loaders) may be worn. Open the machine and inspect for broken or stretched components.
Replace shock absorbers or springs in sets — never individually.
When to call a professional
If the error persists with properly sized loads and the machine is level, the suspension system may need professional replacement.
Information compiled from manufacturer service manuals, official troubleshooting documentation, and appliance repair industry resources. This guide is for informational purposes only — always consult a qualified technician for complex repairs.
Learn more about our sourcesParts you may need
Shock Absorber Kit (set of 2)
Part #W10822553 · $20–$40
If shocks are visibly worn or leaking
Links may earn us a commission at no extra cost to you. We only recommend parts relevant to this repair.