Maytag Washer Error Code F0 E2 — Overload Detected
What this means
The F0 E2 error code appears when the washer's electronic controls sense that the load inside the drum is too heavy. Overloading stresses the motor, suspension springs, and bearings. The washer may refuse to spin or agitate to protect internal components from damage.
Alternate codes: F0E2
Step-by-step fix
3 stepsRemove excess items
Open the washer and remove some of the laundry to reduce the load size. Aim to fill the drum no more than three-quarters full.
Heavy items like comforters and towels are common overload culprits — wash them in smaller batches.
Redistribute remaining items
Spread the remaining laundry evenly around the drum. Bunched-up items can cause the washer to sense an imbalance similar to an overload.
Mix large and small items together for better balance.
Restart the cycle
Close the lid or door and press Start to resume. If the error clears, the overload was the issue.
If the code keeps returning even with small loads, the load-sensing system or suspension may need inspection.
When to call a professional
If the F0 E2 code appears repeatedly with normal-sized loads, the load-sensing pressure switch or suspension system may be faulty and should be inspected by a technician.
Related error codes
Information compiled from manufacturer service manuals, official troubleshooting documentation, and appliance repair industry resources. This guide is for informational purposes only — always consult a qualified technician for complex repairs.
Learn more about our sourcesParts you may need
Links may earn us a commission at no extra cost to you. We only recommend parts relevant to this repair.