Maytag Washer Error Code F0 E1 — Load Detected During Clean Cycle
What this means
The F0 E1 error on Maytag washers indicates the control board has detected a load of clothes or other items in the drum when a Clean Washer or Affresh cycle was selected. This cycle is designed to run with an empty drum and a cleaning tablet. The machine will not start until the drum is emptied.
Alternate codes: F0E1
Step-by-step fix
2 stepsRemove all items from the drum
Open the washer door and remove all clothing, towels, or other items. The Clean Washer cycle must run with an empty drum.
Check for small items like socks that can hide behind the door gasket or under the drum baffles.
Restart the cycle
Close the door, place an Affresh tablet in the drum (optional but recommended), and press Start again.
If you did not mean to run a Clean cycle, simply select a different wash cycle and add your laundry.
When to call a professional
This error does not require professional service. If it appears even with an empty drum, the load sensing system may have a fault — try a different cycle first.
Information compiled from manufacturer service manuals, official troubleshooting documentation, and appliance repair industry resources. This guide is for informational purposes only — always consult a qualified technician for complex repairs.
Learn more about our sourcesParts you may need
No replacement parts typically needed for this fix.
Links may earn us a commission at no extra cost to you. We only recommend parts relevant to this repair.