Maytag Oven Error Code F5 E0 — Door Latch and Switch Disagreement
What this means
The F5 E0 error code indicates a disagreement between the door latch mechanism and the door switches. This commonly occurs when the door latch is partially engaged but the switches do not confirm the door is fully locked, or vice versa. This error most often appears during the self-clean cycle, which requires the door to be securely latched.
Alternate codes: F5E0
Step-by-step fix
4 stepsReset the oven
Turn off the circuit breaker for 5 minutes. This allows the door latch motor to reset to its home position.
Sometimes the latch gets stuck between positions and a reset allows it to retract.
Check for obstructions
Open the oven door and inspect the latch mechanism at the top of the oven opening. Look for food debris, grease buildup, or bent metal that may prevent proper latch engagement.
Clean the latch and strike plate with a damp cloth.
Test the door switches
Access the door switches behind the front panel and test each one with a multimeter for proper continuity when the door is closed.
There are typically two or three door switches — all must function for the self-clean cycle.
Replace the door latch assembly
If the latch motor is not actuating or the switches are faulty, replace the entire door latch assembly. It is typically held by two screws behind the front panel.
Ensure the new latch is aligned properly with the strike plate on the door.
When to call a professional
If the oven door is stuck in the locked position and you cannot open it, call a professional rather than forcing the latch open.
Related error codes
Information compiled from manufacturer service manuals, official troubleshooting documentation, and appliance repair industry resources. This guide is for informational purposes only — always consult a qualified technician for complex repairs.
Learn more about our sourcesParts you may need
Links may earn us a commission at no extra cost to you. We only recommend parts relevant to this repair.