Maytag Oven Error Code F1 E1 — Main Control Board Failure
What this means
The F1 E1 error code indicates a fatal internal error in the oven's main electronic range control (ERC) board. This is commonly triggered by power surges, lightning strikes, or gradual component degradation. The oven will not heat, and the display may flash or show the error repeatedly.
Alternate codes: F1E1
Step-by-step fix
4 stepsReset the oven
Turn off the circuit breaker for the oven for 5-10 minutes, then restore power. If the error was caused by a temporary glitch, it may clear.
A full 10-minute power interruption gives the control board time to fully discharge.
Check for power surges
Note if there was a recent storm, power outage, or electrical event. Power surges are the most common cause of control board failure.
Consider installing a surge protector on the oven circuit.
Inspect the control board
Remove the back panel of the oven and examine the main control board for burn marks, cracked solder joints, or bulging capacitors.
A visual inspection can confirm the board is damaged before ordering a replacement.
Replace the control board
If the error persists after resetting, replace the main electronic range control board. Disconnect all wire harnesses, remove the old board, and install the new one.
Take photos of all wire connections before removing the old board.
When to call a professional
If you are not comfortable working near high-voltage oven components, have a professional replace the control board.
Related error codes
Information compiled from manufacturer service manuals, official troubleshooting documentation, and appliance repair industry resources. This guide is for informational purposes only — always consult a qualified technician for complex repairs.
Learn more about our sourcesParts you may need
Links may earn us a commission at no extra cost to you. We only recommend parts relevant to this repair.