Maytag Dishwasher Error Code F8 E2 — Dispenser System Error
What this means
The F8 E2 error code indicates a problem with the dishwasher's detergent dispensing system. The dispenser may be clogged with dried detergent, the dispenser door may be stuck, or the dispenser actuator motor may have failed. Dishes may not be cleaned properly if detergent is not released at the correct time in the cycle.
Alternate codes: F8E2
Step-by-step fix
4 stepsClean the dispenser
Open the dispenser door and clean out any dried or caked detergent with a soft brush and warm water.
Gel and liquid detergents are less likely to clog than powder detergent.
Check the dispenser door
Make sure the dispenser door opens and closes freely. Look for any obstructions that might prevent it from opening during the cycle, such as tall dishes or pots blocking it.
Do not place large items near the dispenser on the lower rack.
Test the dispenser
Add detergent, close the dispenser, and run a cycle. After the cycle, check if the detergent was released.
If the dispenser door did not open, the actuator or wax motor may be faulty.
Replace the dispenser assembly
If the dispenser door is mechanically damaged or the actuator does not function, replace the dispenser assembly.
The dispenser is mounted to the inner door panel with a few screws.
When to call a professional
If cleaning and clearing obstructions does not fix the issue, a technician can diagnose whether the dispenser motor or wiring is at fault.
Related error codes
Information compiled from manufacturer service manuals, official troubleshooting documentation, and appliance repair industry resources. This guide is for informational purposes only — always consult a qualified technician for complex repairs.
Learn more about our sourcesParts you may need
Links may earn us a commission at no extra cost to you. We only recommend parts relevant to this repair.