Maytag Dishwasher Error Code F5 — Door Switch Error
What this means
The F5 error on Maytag dishwashers means the door switch is not signaling that the door is properly closed and latched. The dishwasher will not start any cycle until it detects a secure door closure. Common causes include a worn door latch, a failed door switch, a misaligned door strike, or a wiring issue.
Alternate codes: F5 E1
Step-by-step fix
4 stepsCheck the door latch
Close the door and check that the latch catches firmly. Open and close the door several times — you should hear and feel a positive click each time.
If the latch handle feels loose or does not spring back, the latch mechanism may be worn.
Inspect the door strike plate
Check the strike plate on the tub that the latch engages with. Make sure it is not bent, loose, or damaged. Tighten the screws if loose.
Slam-closing the dishwasher door can bend the strike plate over time.
Test the door switch
Disconnect power. Access the door switch behind the inner door panel. Disconnect the wires and test for continuity — the switch should be closed when the latch is engaged.
On some Maytag models, the door switch is integrated into the latch assembly and must be replaced as a unit.
Replace the latch or switch if faulty
Replace the door latch assembly or switch as needed. Reconnect all wiring, reassemble the door panel, and test with a short cycle.
After replacing, close the door gently to set the latch — slamming can misalign a new latch.
When to call a professional
If the latch and switch test fine but the error persists, the control board may not be processing the switch input correctly.
Information compiled from manufacturer service manuals, official troubleshooting documentation, and appliance repair industry resources. This guide is for informational purposes only — always consult a qualified technician for complex repairs.
Learn more about our sourcesParts you may need
Door Latch Assembly
Part #W10862259 · $25–$50
If latch does not engage firmly or switch fails
Links may earn us a commission at no extra cost to you. We only recommend parts relevant to this repair.