LG Washer Error Code Ed5 — Dispenser PCB Communication Error
What this means
The Ed5 error code indicates a communication failure between the detergent dispenser printed circuit board (PCB) and the main washer control board. This is typically caused by a loose wire harness, a temporary electronic glitch, or a failed dispenser PCB. A power-cycle often resolves the issue, but persistent occurrences may require board replacement.
Alternate codes: ED5
Step-by-step fix
2 stepsPower-cycle the washer
Unplug the washer for 60 seconds, then plug it back in and start a cycle. This clears temporary communication faults.
This resolves Ed5 errors caused by power surges or temporary electronic interference.
Check the wire harness
Unplug the washer. Locate the wire harness connecting the dispenser module to the main control board (usually accessible behind the top panel). Disconnect and firmly reseat the connector.
When to call a professional
If the error persists after a power-cycle and harness check, the dispenser PCB or main control board may need replacement by a qualified technician.
Related error codes
The automatic detergent dispenser pump is not functioning correctly.
Moderate Repair · 15–30 minutes
The automatic detergent dispenser pump circuit is open or disconnected.
Moderate Repair · 20–40 minutes
The Wi-Fi module has lost connection with the main control board.
Easy Fix · 5–15 minutes
Information compiled from manufacturer service manuals, official troubleshooting documentation, and appliance repair industry resources. This guide is for informational purposes only — always consult a qualified technician for complex repairs.
Learn more about our sourcesParts you may need
Links may earn us a commission at no extra cost to you. We only recommend parts relevant to this repair.