KitchenAid Oven Error Code F6-E0 — Return Line Not Connected
What this means
Error code F6-E0 indicates the return communication line between the user interface and the electronic oven control board is not connected or has failed. This prevents the control panel from sending commands to the oven, making it unresponsive to user input. The issue is typically caused by a faulty control board, a loose wire harness, or a damaged communication circuit.
Alternate codes: F6E0
Step-by-step fix
4 stepsPower cycle the oven
Turn off the circuit breaker for at least 1 minute, then restore power. This can clear a temporary communication glitch.
Wait the full minute to ensure the control board fully resets.
Inspect the wire harness
Unplug the oven and access the control board behind the back panel. Check the wire harness connecting the user interface to the EOC board.
Look for loose connectors, pinched wires, or signs of heat damage.
Reseat all connections
Disconnect and firmly reconnect all wire harness connectors on the control board. Ensure each connector clicks securely into place.
Corrosion on connector pins can be cleaned with electrical contact cleaner.
Replace the control board
If the error persists after reseating connections, the EOC board has an internal communication circuit failure and needs replacement.
Note the model number before ordering — control boards are model-specific.
When to call a professional
This repair involves working near high-voltage oven wiring. If you are not experienced with appliance electrical systems, professional service is recommended.
Related error codes
Information compiled from manufacturer service manuals, official troubleshooting documentation, and appliance repair industry resources. This guide is for informational purposes only — always consult a qualified technician for complex repairs.
Learn more about our sourcesParts you may need
Electronic Oven Control Board
Part #WPW10340935 · $150–$300
Required if return communication line has failed internally
Links may earn us a commission at no extra cost to you. We only recommend parts relevant to this repair.