KitchenAid Microwave Error Code F6E0 — Communication Error
What this means
Error code F6E0 indicates a communication failure between the microwave control panel and the main control system. This prevents the microwave from executing commands. The error can be caused by a power surge, a loose internal connection, a blown line fuse, or a failed control board.
Alternate codes: F6-E0, F6 E0, F6
Step-by-step fix
4 stepsPower cycle the microwave
Unplug the microwave from the wall outlet for 5 minutes. This allows the control system to fully reset.
For built-in or over-the-range models, use the circuit breaker to disconnect power.
Restore power and test
Plug the microwave back in and try to use it normally. If the error clears, run a 30-second test to verify proper operation.
If the error clears but returns intermittently, there may be a loose internal connection.
Check for blown fuse
If the error persists, the internal line fuse may be blown. On some models, the fuse is accessible behind a small panel without opening the main microwave cover.
Check your owner's manual for fuse location — some models have a user-accessible fuse compartment.
Schedule professional service
If a power reset does not clear the error and the fuse is not user-accessible, professional service is needed to check the internal wiring and control board.
Do not attempt to open the microwave cover — the high-voltage capacitor can hold a lethal charge.
When to call a professional
If a 5-minute power reset does not resolve the error, professional service is required. Do not attempt to access internal microwave components.
Related error codes
Information compiled from manufacturer service manuals, official troubleshooting documentation, and appliance repair industry resources. This guide is for informational purposes only — always consult a qualified technician for complex repairs.
Learn more about our sourcesParts you may need
Main Control Board
Part #WPW10486189 · $100–$200
Required if control board communication circuit has failed
Links may earn us a commission at no extra cost to you. We only recommend parts relevant to this repair.