KitchenAid Dryer Error Code F01 — Main Control Board Failure
What this means
The F01 error code on KitchenAid dryers indicates the main electronic control board has an internal failure. The board manages all dryer functions including temperature regulation, cycle timing, and motor control. When it fails, the dryer may not start, may stop mid-cycle, or may not respond to controls at all.
Alternate codes: F1
Step-by-step fix
3 stepsReset the dryer
Unplug the dryer for 5 minutes, then plug it back in. If the code clears and the dryer works normally, it was a temporary glitch.
Check for the code's return
If F01 returns after the reset, the control board has a permanent failure and must be replaced.
Replace the control board
Unplug the dryer. Access the main control board (usually behind the top or rear panel). Photograph all connections, disconnect, remove the old board, install the new one, and reconnect.
Match the part number exactly to your model.
When to call a professional
Control board replacement is best done by a technician who can verify the board is the actual problem and not a secondary issue.
Related error codes
Information compiled from manufacturer service manuals, official troubleshooting documentation, and appliance repair industry resources. This guide is for informational purposes only — always consult a qualified technician for complex repairs.
Learn more about our sourcesParts you may need
Links may earn us a commission at no extra cost to you. We only recommend parts relevant to this repair.