KitchenAid Dishwasher Error Code F6E2 — Water Inlet Valve Failure
What this means
The F6E2 error code on KitchenAid dishwashers indicates the water inlet valve has an electrical failure. The valve's solenoid coil may be open or shorted, preventing it from opening to let water in. This is different from F6E1 (no fill) — F6E2 specifically points to the valve's electrical components rather than water supply issues.
Alternate codes: 6-2
Step-by-step fix
3 stepsTest the inlet valve
Unplug the dishwasher. Access the water inlet valve (behind the lower access panel). Disconnect the valve wire connections and test the solenoid coil with a multimeter for resistance.
A good solenoid typically reads between 500–1,500 ohms.
Check the wiring
Inspect the wire harness from the control board to the inlet valve for damage, loose connections, or corrosion.
Replace the inlet valve
If the valve tests open (infinite ohms) or shorted (0 ohms), replace the water inlet valve. Turn off the water supply, disconnect the old valve, install the new one, and test.
When to call a professional
If the valve is good but the control board isn't sending power to it, the board may need replacement.
Related error codes
Information compiled from manufacturer service manuals, official troubleshooting documentation, and appliance repair industry resources. This guide is for informational purposes only — always consult a qualified technician for complex repairs.
Learn more about our sourcesParts you may need
Links may earn us a commission at no extra cost to you. We only recommend parts relevant to this repair.