KitchenAid Dishwasher Error Code F2E1 — Stuck Button on User Interface
What this means
The F2E1 error code on KitchenAid dishwashers indicates a stuck button on the user interface control panel. The control board is receiving a continuous signal from one of the keypad buttons. This can be caused by a physically stuck button, moisture behind the control panel, or a failed user interface board.
Alternate codes: 2-1
Step-by-step fix
4 stepsPress each button
Press every button on the control panel one at a time. Check if any feel stuck, sticky, or unresponsive. Try to free any stuck buttons.
Steam from hot wash cycles can cause moisture buildup behind buttons.
Clean the control panel
Wipe the entire control panel with a damp cloth. Clean around all buttons to remove any residue that might be causing a button to stick.
Reset the dishwasher
Disconnect the user interface wire harness, wait 5 minutes, reconnect, and power cycle the unit.
If the code clears with the interface disconnected, the user interface panel is the problem.
Replace the user interface panel
If a button remains stuck or the interface is unresponsive after cleaning, replace the user interface control panel.
When to call a professional
If the new user interface panel doesn't resolve the issue, the main control board may be interpreting signals incorrectly. A technician should check both components.
Related error codes
Information compiled from manufacturer service manuals, official troubleshooting documentation, and appliance repair industry resources. This guide is for informational purposes only — always consult a qualified technician for complex repairs.
Learn more about our sourcesParts you may need
User Interface Control Panel
Part #W10380685 · $50–$120
If button is stuck or panel has failed
Links may earn us a commission at no extra cost to you. We only recommend parts relevant to this repair.