Kenmore Washing Machine Error Code F8 E3 — Overflow Condition
What this means
Error F8 E3 indicates water has risen above the maximum safe level, triggering the overflow protection. A stuck-open water inlet valve is the most common cause. The washer will stop all operations and attempt to drain the excess water.
Alternate codes: F8E3
Step-by-step fix
4 stepsTurn off water supply
Close the hot and cold water supply valves behind the washer immediately.
Let it drain
The washer should activate the drain pump automatically. If not, run a drain/spin cycle.
Test the inlet valve
After draining, check if water continues to flow into the tub with the washer off. If so, the inlet valve is stuck open.
Even a small trickle means the valve needs replacement.
Replace the inlet valve
Replace the water inlet valve assembly if it does not shut off completely.
When to call a professional
If the overflow caused water damage or the valve replacement is beyond your comfort level.
Information compiled from manufacturer service manuals, official troubleshooting documentation, and appliance repair industry resources. This guide is for informational purposes only — always consult a qualified technician for complex repairs.
Learn more about our sourcesParts you may need
Links may earn us a commission at no extra cost to you. We only recommend parts relevant to this repair.