Kenmore Washing Machine Error Code F7 E5 — Shifter Assembly Fault
What this means
Error F7 E5 indicates the shifter assembly (also called the actuator) has malfunctioned. This component shifts the transmission between agitation and spin modes. When it fails, the washer may not agitate, not spin, or get stuck between modes.
Alternate codes: F7E5
Step-by-step fix
4 stepsPower cycle
Unplug for 5 minutes and restart. Occasionally the shifter gets temporarily out of position.
Run a recalibration cycle
Some Kenmore models allow a recalibration by running a specific diagnostic sequence. Check your service manual.
Inspect the shifter assembly
The shifter is located at the bottom of the washer, attached to the transmission. Check the wiring and connector.
Replace the shifter
If the error persists, replace the shifter assembly. This is a common wear item on top-load washers.
When to call a professional
If you are not comfortable working underneath the washer, professional service is recommended.
Information compiled from manufacturer service manuals, official troubleshooting documentation, and appliance repair industry resources. This guide is for informational purposes only — always consult a qualified technician for complex repairs.
Learn more about our sourcesParts you may need
Links may earn us a commission at no extra cost to you. We only recommend parts relevant to this repair.