Kenmore Washing Machine Error Code F3 E1 — Water Level Pressure Sensor Fault
What this means
Error F3 E1 indicates the water level pressure sensor is not reading correctly. This sensor uses an air hose connected to the tub to measure water level. A clogged, kinked, or disconnected air hose, or a faulty sensor, will prevent the washer from filling to the correct level.
Alternate codes: F3E1
Step-by-step fix
4 stepsInspect the air hose
Locate the small rubber air hose that runs from the bottom of the tub to the pressure sensor on the control board area. Check for kinks, cracks, or disconnections.
Blow gently through the hose — you should hear a click from the pressure switch.
Check connections
Make sure both ends of the air hose are securely connected — at the tub and at the sensor.
Test the pressure sensor
If the hose is clear and connected, the sensor itself may have failed.
Replace faulty components
Replace the air hose if damaged or the pressure sensor if testing confirms failure.
When to call a professional
If sensor replacement does not fix the issue, the main control board may need diagnosis.
Information compiled from manufacturer service manuals, official troubleshooting documentation, and appliance repair industry resources. This guide is for informational purposes only — always consult a qualified technician for complex repairs.
Learn more about our sourcesParts you may need
Links may earn us a commission at no extra cost to you. We only recommend parts relevant to this repair.